2×1W MANET IP Mesh Radio Module for UAV, UGV & Robotics
Overview
The Vcan1401 2×1W MANET IP Mesh Radio Module is a compact, high-performance wireless communication solution designed for UAVs, UGVs, USVs, and mobile robotic systems. Featuring TDD-OFDM technology and dual 1W RF power amplifiers, it supports bidirectional IP data, real-time video, telemetry, and remote-control communications. Its self-organizing MANET architecture supports point-to-point, point-to-multipoint, multi-hop relay, and dynamic IP mesh networking.
Key Features
• Dual 1W RF output
• Self-organizing MANET and IP mesh networking
• Point-to-point, point-to-multipoint, and multi-hop relay
• Peak throughput of ≥90 Mbps under supported configurations
• Video support up to 1080p at 60 fps
• Typical range up to 30 km with omnidirectional antennas or 50 km with directional antennas under suitable conditions
• 1 × RJ45 Ethernet and 2 × bidirectional RS232
• TDD-OFDM with BPSK, QPSK, 16QAM, and 64QAM
• Configurable frequency, bandwidth, transmit power, data rate, IP, and encryption settings
• IP67 protection
• 11–28V DC input
• Compact dimensions: 72 × 48 × 10 mm; weight under 51 g
Technical Specifications
Model: Vcan1401
RF Output Power: 2 × 1W
Operating Frequency: 1410–1460 MHz or 1400–1500 MHz, depending on configuration
Channel Bandwidth: 5 / 10 / 20 / 40 MHz
Air Interface: TDD-OFDM
Modulation: BPSK / QPSK / 16QAM / 64QAM
Receiver Sensitivity: -96 dBm at 10 MHz
Peak Throughput: ≥90 Mbps under supported configurations
Single-Hop Latency: ≤5 ms
End-to-End Video Latency: approximately 20–80 ms, depending on system configuration
Video Resolution: up to 1080p at 60 fps
Ethernet: 1 × RJ45, expandable to 2 ports; onboard 4-pin LAN
Serial: 2 × bidirectional RS232, up to 115.2 kbps
Routing: Dynamic and static
Typical Range: up to 30 km omnidirectional / 50 km directional under suitable conditions
Maximum Configurable Range: up to 80 km under suitable conditions
RF Connector: SMA-F
Power Supply: 11–28V DC
Power Consumption: approximately 6W low-power / 14W maximum
Power Connector: XT30PW-M male with adapter cable
Dimensions: 72 × 48 × 10 mm
Weight: under 51 g
Protection: IP67
Operating Temperature: -35°C to +65°C
Applications
UAV and drone links; UGV and robotics; USV and aquatic drones; multi-robot coordination; emergency communications; industrial inspection; remote monitoring; wireless IP camera and sensor networks.
Deployment Recommendation
Two modules can provide a point-to-point link. Three or more are recommended to demonstrate mesh networking with a relay node. Network redundancy depends on topology and operating conditions.
FAQ
Q1: Does this module support IP mesh networking?
Yes. It supports MANET self-organizing networking, allowing compatible nodes to establish mesh connections and relay data.
Q2: Can it transmit video and control data simultaneously?
Yes. IP video, telemetry, and control data can share the wireless link, provided their combined bandwidth requirements remain within the available network capacity.
Q3: What is the maximum communication distance?
The published typical range is up to 30 km with omnidirectional antennas and up to 50 km with directional antennas. A software-configurable maximum of up to 80 km is specified for suitable configurations. Actual results depend on antenna placement, terrain, bandwidth, interference, and line of sight.
Q4: Which interfaces are available?
The module provides an RJ45 Ethernet interface and two bidirectional RS232 interfaces. Additional interface options may be available depending on the hardware configuration.
Q5: Can the operating frequency be customized?
Yes. Other frequency bands may be available on request. Confirm the required frequency and regional radio regulations before ordering.
Q6: Is the module suitable for outdoor use?
The module is specified with IP67 protection and an operating temperature range of -35°C to +65°C. Installation and connector sealing should follow the manufacturer's guidance.
Q7: What power supply is required?
The module accepts 11–28V DC. Ensure the power source can support the module's peak consumption and the requirements of the complete system.
Q8: Is this a complete radio system or an embedded module?
The Vcan1401 is a compact radio module intended for integration into UAVs, UGVs, robots, and other systems. Confirm the included antennas, cables, accessories, and quantity with the seller before purchase.
Ordering Note
Confirm frequency, bandwidth, antennas, interfaces, accessories, and node quantity before ordering. Actual performance depends on configuration and deployment conditions.