CVBS AV Analog to IP Ethernet Video Encoder with Wi-Fi Module
Overview
The CVBS AV Analog to IP Ethernet Video Encoder with Wi-Fi Module is a compact video conversion board designed to transform analog composite video signals into digital IP video streams. It supports H.264/H.265 encoding and enables video transmission through Ethernet or an optional 2.4 GHz Wi-Fi module.
With its lightweight 38.8 × 38.8 mm PCB design, low power consumption, and support for RTSP and ONVIF, this encoder is suitable for FPV drone systems, analog CCTV upgrades, vehicle monitoring, industrial applications, and embedded video projects.
Key Features
• Analog-to-IP Video Conversion: Converts CVBS composite video signals into IP network streams for digital viewing and transmission.
• H.264/H.265 Encoding: Efficient video compression helps reduce network bandwidth requirements.
• Ethernet and Optional Wi-Fi: Supports wired Ethernet streaming, with optional 2.4 GHz Wi-Fi connectivity for wireless applications.
• Full HD Video: Supports video encoding up to 1920 × 1080 at 30 fps.
• Multiple Streaming Protocols: Supports RTSP, RTMP, HTTP, UDP, TCP/IP, ONVIF, MQTT, GB28181, and WebRTC.
• Compact and Lightweight: Measures approximately 38.8 × 38.8 mm and weighs only 9.5 g.
• Dual-Stream Output: Supports a main stream and a secondary stream for different viewing and monitoring requirements.
• Audio Support: Includes microphone input and line output, with G.711/AAC audio encoding.
• Local Recording: Supports TF card recording up to 256 GB.
• Developer-Friendly Integration: Includes a TTL UART interface and SDK support for customized applications.
• Wide-Voltage Input: Operates on DC 6–24 V, with optional PoE support.
Technical Specifications
Product Type: Analog CVBS/AV to IP Video Encoder
Main Processor: SSC335
Video Capture Chip: PR2000K
Video Input: 1 × CVBS composite video input
Video Encoding: H.264 / H.265 / MJPEG
Maximum Resolution: 1920 × 1080 at 30 fps
Additional Resolutions: 1280 × 720 at 30 fps; 720 × 576 at 25 fps
Adjustable Bitrate: 0.1–8 Mbps
Frame Rate: 1–30 fps
Network Interface: 1 × RJ45, 10/100 Mbps
Wireless Connectivity: Optional 2.4 GHz Wi-Fi module
Supported Protocols: RTSP, RTMP, HTTP, UDP, TCP/IP, ONVIF, MQTT, GB28181, WebRTC
Audio Interface: 1 × MIC input and 1 × LINE_OUT
Audio Codec: G.711 / AAC
Local Storage: TF card up to 256 GB
Serial Interface: TTL UART
Power Input: DC 6–24 V
Operating Temperature: -20°C to +70°C
Dimensions: 38.8 × 38.8 mm
Weight: Approximately 9.5 g
Default IP Address: 192.168.1.188
Cooling: Passive cooling
Applications
• FPV Drones and UAVs: Convert analog camera or receiver video into IP streams for network transmission and ground-station monitoring.
• Analog CCTV Upgrades: Connect compatible analog cameras to IP-based monitoring systems.
• Wireless Video Transmission: Stream analog video to computers, mobile devices, or network video recorders over a supported wireless network.
• Vehicle Surveillance: Integrate analog front-view or rear-view cameras with network monitoring systems.
• Industrial Monitoring: Incorporate video feeds into industrial automation and IoT projects.
• Live Streaming and Broadcasting: Send compatible analog video sources to IP-based streaming systems.
• Embedded Video Systems: Integrate analog video capture into compact devices and customized network applications.
FAQ
Q: Can this encoder convert CVBS video to an IP stream?
A: Yes. It converts compatible analog composite video input into an IP video stream over Ethernet or optional Wi-Fi.
Q: Does it support wireless video transmission?
A: Yes. Wireless streaming is available when the compatible optional 2.4 GHz Wi-Fi module is installed and configured.
Q: Which video encoding formats are supported?
A: The board supports H.264, H.265, and MJPEG encoding.
Q: Can I view the video using VLC Media Player?
A: Yes. The encoder supports RTSP streaming, allowing compatible software such as VLC to access the video stream.
Q: What is the power supply requirement?
A: The specified board input is DC 6–24 V. A 5 V supply cannot power the board directly unless an appropriate voltage converter is used.
Q: Is the encoder suitable for drone applications?
A: Yes. Its compact size and low weight make it suitable for compatible FPV and UAV video systems, subject to the system's power, interface, and network requirements.
Q: Can the product be customized?
A: Customization options may include compatible video inputs, wireless connectivity, interfaces, and firmware integration. Please confirm the required configuration before ordering.
Important Notes
• The Wi-Fi module and PoE functionality may be optional and should be confirmed with the supplier.
• Confirm the exact input format, connector pinout, power requirements, and included accessories before installation.
• Wireless range and streaming latency depend on the antenna, environment, network conditions, and configuration.