IP Mesh MANET Transceiver with Two-Way IP Audio for UAVs and Robotics
Overview
The Vcan1401-Mesh IP Mesh MANET Transceiver is a compact wireless communication module designed for UAVs, drones, unmanned ground vehicles (UGVs), and robotic systems. It integrates wireless video transmission, IP data communication, telemetry, control signals, and two-way audio into a unified communication platform.
Built on OFDM-based wireless transmission technology, this transceiver supports mobile ad hoc networking (MANET), allowing multiple nodes to establish a dynamic wireless mesh network without relying on fixed communication infrastructure.
With built-in full-duplex IP audio capability, the system enables real-time, two-way voice communication alongside video and data transmission. Its lightweight design makes it suitable for applications where payload capacity, communication reliability, and low latency are important.
Key Features
1. IP Mesh MANET Networking
Supports point-to-point, point-to-multipoint, and multipoint-to-multipoint communication. Multiple transceivers can form a self-organizing wireless mesh network, with individual nodes relaying data to extend network coverage.
2. Bidirectional IP Audio
Supports real-time, full-duplex voice communication over IP. Operators can communicate continuously without manually activating a push-to-talk (PTT) button, subject to the selected audio configuration.
3. Wireless Video and Data Transmission
Combines video streaming, Ethernet data, telemetry, and control signals over a single wireless communication link, simplifying system integration for unmanned platforms.
4. Long-Range Wireless Communication
Designed for long-distance communication between airborne platforms and ground stations. Typical advertised ranges are up to 30 km with omnidirectional antennas and up to 50 km with directional antennas, depending on the environment, antenna configuration, and operating conditions.
5. Low-Latency Transmission
Optimized for real-time video monitoring and remote control applications, with a stated minimum video transmission delay of approximately 20 ms under suitable configurations, excluding camera and display delays.
6. Adaptive Modulation
Supports BPSK, QPSK, 16QAM, and 64QAM modulation options to balance transmission throughput and link robustness as radio conditions change.
7. Secure Wireless Communication
Supports AES-128/AES-256 encryption options, along with OFDM transmission techniques designed to improve performance in challenging radio environments.
8. Compact and Lightweight Design
With dimensions of approximately 73 × 47 × 10 mm and a weight of approximately 55–60 g, the module is suitable for drones, robots, and other payload-sensitive equipment.
9. Flexible Integration
Ethernet and RS232 interfaces support integration with network cameras, embedded computers, telemetry systems, and other compatible equipment. Interface availability depends on the selected hardware configuration.
Technical Specifications
| Parameter | Specification |
|---|---|
| Product Model | Vcan1401-Mesh |
| Product Type | IP Mesh MANET Wireless Transceiver |
| Wireless Technology | TDD-COFDM |
| Frequency Options | 1415–1465 MHz / 2310–2380 MHz |
| Custom Frequency | 2.4 GHz and other bands upon request |
| Standard RF Output Power | 2 × 1 W |
| Optional RF Power | 2 × 2 W / 2 × 5 W and other customized options |
| Receiver Sensitivity | -110 dBm @ 1 MHz |
| Channel Bandwidth | 4 MHz / 8 MHz |
| Modulation | BPSK / QPSK / 16QAM / 64QAM |
| Standard Data Rate | Up to 32 Mbps, depending on configuration |
| Optional High-Rate Mode | Up to 90 Mbps, subject to configuration |
| Network Topology | Point-to-Point / Point-to-Multipoint / Mesh |
| Mesh Node Capacity | Up to 32 nodes with standard firmware |
| Relay Capability | Up to 5 hops with standard configuration |
| Ethernet Interface | 2 × RJ45 / FPC, depending on configuration |
| Serial Interface | 2 × RS232 ports |
| Two-Way IP Audio | Supported with compatible audio configuration |
| Operating Voltage | 7–18 V for 2 × 1 W version |
| Optional High-Power Supply | 16–26 V for 2 × 5 W version |
| Power Consumption | Approximately 6–12 W, depending on configuration |
| Operating Temperature | -40°C to +85°C |
| Protection Rating | IP67, subject to the specified enclosure and configuration |
| Dimensions | Approximately 73 × 47 × 10 mm |
| Weight | Approximately 55–60 g |
Note: Specifications may vary with frequency, power amplifier, firmware, enclosure, and interface configuration. Please confirm the required configuration before ordering.
Applications
- UAV and Drone Communication: Wireless transmission of video, telemetry, control commands, and voice between drones and ground stations.
- UGV and Robotics: Reliable communication for mobile robots, autonomous platforms, and multi-robot coordination.
- Unmanned Surface Vehicles (USVs): Wireless data exchange and remote monitoring for unmanned marine platforms.
- Industrial Remote Monitoring: Long-range IP video and data transmission for remote equipment and field operations.
- Emergency Response: Deployable communication networks for disaster areas and locations without fixed network infrastructure.
- Security and Surveillance: Wireless video backhaul and remote monitoring over mobile mesh networks.
- Multi-Node Wireless Networks: Communication between multiple mobile platforms using mesh networking and relay capabilities.
Customization Options
The Vcan1401-Mesh platform supports several configuration options to accommodate different project requirements.
- Operating Frequency: 1.4 GHz, 2.3 GHz, and customized frequency bands.
- RF Output Power: Standard 2 × 1 W, with higher-power configurations available upon request.
- Wireless Networking: Point-to-point, point-to-multipoint, and IP Mesh MANET.
- Audio Communication: Two-way IP audio or alternative audio configurations, subject to hardware selection.
- Encryption: AES-128 or AES-256, depending on configuration.
- Hardware Integration: Interface and enclosure options for different UAV, UGV, and robotics platforms.
Contact our team to confirm frequency availability, output power, interfaces, and compatibility with your existing equipment.
FAQ
Q1: What is an IP Mesh MANET transceiver?
An IP Mesh MANET transceiver is a wireless communication device that allows multiple nodes to exchange IP data and relay traffic through a self-organizing network. It is suitable for mobile platforms that require flexible wireless connectivity.
Q2: Does this module support two-way voice communication?
Yes. The product supports bidirectional IP audio, enabling full-duplex voice communication when the appropriate audio hardware and system configuration are used.
Q3: Can it transmit video and telemetry simultaneously?
Yes. It can carry IP video, Ethernet data, telemetry, and control traffic over the wireless link. Actual throughput depends on bandwidth, modulation, signal conditions, and network configuration.
Q4: What is the maximum transmission distance?
The product page specifies distances of up to 30 km with omnidirectional antennas and up to 50 km with directional antennas. Actual performance varies with antenna gain, installation height, terrain, interference, and line-of-sight conditions.
Q5: How many nodes can join the mesh network?
The standard configuration supports up to 32 nodes. Larger network capacities may be available with customized firmware.
Q6: Can one transceiver act as a wireless relay?
Yes. Nodes can relay data between other nodes to extend network coverage. The standard configuration supports up to five relay hops.
Q7: Which frequency bands are available?
The listed frequency options include 1415–1465 MHz and 2310–2380 MHz, with customized frequency options available upon request. Confirm the required band before ordering.
Q8: Is the module suitable for lightweight drones?
Yes. The module measures approximately 73 × 47 × 10 mm and weighs approximately 55–60 g, making it suitable for many UAV and robotics applications where size and weight matter.
Q9: Does the product support encryption?
Yes. AES-128 and AES-256 encryption options are listed, depending on the selected configuration.
Q10: Is customization available for OEM projects?
Yes. Frequency, RF output power, interfaces, enclosure, and other configuration options can be discussed for OEM and ODM projects.
Important Ordering Information
- The listed price on the source product page is per node.
- A complete wireless link or mesh network may require multiple transceiver nodes.
- Confirm the operating frequency, RF output power, antenna requirements, power supply, audio functionality, and interface configuration before placing an order.
- Wireless operating frequencies and output power must comply with the applicable regulations in the country of use.