10W RF Power Amplifier for Drone Video Data TDD Transceiver
Product Overview
The DV2135 is a compact, high-power RF amplifier designed to enhance the transmission performance of compatible Morningcore CX6xxx series TDD transceiver modules. It increases RF output power to 10W (40 ± 2 dBm), helping extend wireless communication range and improve link reliability in UAV video and data transmission systems.
Key Features
• 10W RF output power for enhanced transmission performance
• Compatible with selected CX667x and CX677x TDD transceiver modules
• Available frequency options: 1420–1530 MHz or 566–678 MHz
• Typical TX gain: 18 dB
• RX channel gain: 2–10 dB
• Automatic TX/RX switching control
• Compact CNC-machined aluminum enclosure
• DC 24–30V power supply, typically 28V
• SMA RF output and IPEX RF input
• External heatsink or aluminum cooling plate required
Technical Specifications
Model: DV2135
Product Type: RF Power Amplifier Module
Operating Frequency: 1420–1530 MHz or 566–678 MHz, depending on version
RF Input Power: 23 ± 2 dBm
RF Output Power: 10W (40 ± 2 dBm)
TX Gain: 18 dB typical
RX Channel Gain: 2–10 dB
Supply Voltage: DC 24–30V
Typical Supply Voltage: 28V
Peak Current: ≤ 2.5A at 28V
Maximum Power Consumption: ≤ 28W at 10W RF output
Control Interface: 2-pin TX/RX switching control
RF Input Connector: IPEX female
RF Output Connector: SMA female
Dimensions: 65 × 62 × 13.5 mm, excluding connectors
Housing: CNC-machined aluminum
Cooling: External heatsink or aluminum baseplate required
Signal and Control Interface
• Red wire (VDD): DC power input, typically 28V
• Black wire (GND): Power ground
• Yellow/black 2-pin cable: TX/RX switching control
• IN (IPEX): RF input from a compatible transceiver module
• ANT (SMA): RF output to the antenna
Applications
• UAV and drone wireless video transmission
• TDD wireless video and data links
• Long-range telemetry and command links
• COFDM wireless communication systems, subject to frequency and interface compatibility
• Robotics and remote monitoring systems
• Custom RF communication equipment
Installation Notes
Use a compatible CX6xxx transceiver and confirm the correct frequency version before installation. Connect the TX/RX control signal according to the module pinout. Provide adequate external heat dissipation, especially during extended transmission. Verify power supply polarity, RF connections, antenna compatibility, and applicable RF regulations before operation.
FAQ
Q1: What is the maximum RF output power?
A: The rated output is 10W, or 40 ± 2 dBm.
Q2: Which transceiver modules are compatible?
A: The VCAN2135 is designed for compatible Morningcore CX6xxx series modules, including selected CX667x and CX677x models. Confirm the exact hardware and control pinout before ordering.
Q3: Which frequency bands are available?
A: The listed options are 1420–1530 MHz and 566–678 MHz. Select the required frequency version when placing an inquiry or order.
Q4: Does the module require additional cooling?
A: Yes. An external heatsink or aluminum baseplate is required to dissipate heat during operation.
Q5: What power supply is required?
A: The module operates from DC 24–30V, typically 28V. The supply must support the required current and power.
Q6: Is this a complete wireless video transmitter and receiver?
A: No. The VCAN2135 is an RF power amplifier module intended for integration with a compatible transceiver. The transceiver, antenna, and other system components may need to be purchased separately.
Important Notice
Performance depends on the connected transceiver, antenna, installation, cooling, and operating environment. Confirm the required frequency band and hardware compatibility before purchase. Users are responsible for complying with local radio-frequency transmission regulations.