AI Dual Spectrum Thermal & Visible Light Camera for Vehicles
Overview
The Vcan2022 AI Dual Spectrum Thermal & Visible Light Camera is an intelligent vehicle-mounted vision system that combines infrared thermal imaging with Full HD visible-light imaging. Designed for vehicles and heavy machinery operating in challenging environments, it helps drivers and operators detect pedestrians, vehicles, and potential obstacles in low-light conditions, darkness, fog, dust, and strong headlight glare.
With built-in AI detection, dual-spectrum image display, and real-time alarm outputs, this camera enhances situational awareness and supports safer vehicle operation. Its rugged IP69K-rated design makes it suitable for demanding industrial and outdoor applications.
Key Features
1. Dual-Spectrum Thermal and Visible Imaging
Combines a 256 × 192 thermal imaging sensor with a 1920 × 1080 Full HD visible-light camera. View thermal and optical images simultaneously, with thermal overlays to help highlight potential hazards.
2. AI Pedestrian and Vehicle Detection
Intelligent algorithms detect and highlight pedestrians and vehicles, helping operators identify potential collision risks more quickly.
3. Extended Detection Coverage
Pedestrian detection range: 0.5–15 m.
Vehicle detection range: 0.5–40 m.
Actual performance depends on environmental conditions, installation, and target characteristics.
4. Improved Visibility in Challenging Conditions
Thermal imaging helps identify heat-emitting targets in darkness and can improve visibility in fog, dust, smoke, rain, and conditions with strong visible-light glare.
5. Real-Time Warning and Alarm Output
Supports detection frames, warning frames, and alarm signal outputs. Audio alerts can be integrated with compatible monitors or external loudspeakers.
6. Rugged Industrial Design
IP69K-rated protection against water and dust, with a specified 5.9 g anti-vibration rating for demanding vehicle and machinery environments.
7. Flexible Display Options
Supports simultaneous thermal and visible-light viewing, including thermal image overlay to emphasize detected hazards.
8. Convenient Configuration and Updates
Configure and calibrate the system through a mobile web interface using the built-in Wi-Fi hotspot. Firmware updates can be performed using a USB flash drive.
9. OEM and Customization Options
Available customization options include visible-light lens selection, detection zones, alarm thresholds, display modes, alarm integration, and OEM branding.
Technical Specifications
General
Product Name: AI Dual Spectrum Thermal & Visible Light Camera for Vehicles
Model: Vcan2022
Color: Black
Weight: 640 g
Power
Power Supply: DC 10–36 V
Maximum Power Consumption: 2.5 W
Thermal Imaging Camera
Resolution: 256 × 192
Frame Rate: 25 fps
Lens: 3.2 mm
Horizontal Field of View: 53°
Visible-Light Camera
Resolution: 1920 × 1080 (Full HD)
Frame Rate: 25 fps / 30 fps
Lens Options: 6 mm or 2.3 mm
Horizontal Field of View: 50° or 140°
Video Output
Video Channel: 1CH
Video Format: AHD
Output Resolution: 1920 × 1080P
Detection and Alarm Frames: Supported
Interfaces and Connectivity
Device Connector: 8-pin male aviation connector
External Connector: 4-pin female connector for power, video, and audio
USB Interface: USB 2.0 female
Alarm Interface: I/O alarm output wires
Environmental Specifications
Operating Temperature: -20°C to +70°C
Storage Temperature: -40°C to +85°C
Ingress Protection: IP69K
Anti-Vibration Rating: 5.9 g
Dimensions
Thermal Camera Module: 83 × 73 × 38 mm
Visible-Light Camera Module: 95 × 60 × 70 mm
Applications
• Construction machinery, including excavators, loaders, bulldozers, and cranes
• Mining vehicles and heavy-duty equipment
• Agricultural machinery, including tractors and harvesters
• Industrial vehicles and forklifts
• Municipal, utility, and maintenance vehicles
• Special-purpose vehicles operating at night or in poor visibility
• Vehicle blind-spot monitoring and pedestrian awareness systems
• Industrial vehicle safety and hazard-warning systems
FAQ
Q1: Can the Vcan2022 camera work in complete darkness?
Yes. Its thermal imaging sensor detects heat signatures, allowing it to identify suitable targets without relying on visible light.
Q2: Does the camera support pedestrian and vehicle detection?
Yes. Built-in AI algorithms support pedestrian detection at approximately 0.5–15 m and vehicle detection at approximately 0.5–40 m under suitable conditions.
Q3: Can thermal and visible-light images be displayed together?
Yes. The system supports dual-spectrum viewing and thermal image overlay to help operators recognize potential hazards.
Q4: Is the camera suitable for heavy machinery?
Yes. Its IP69K-rated protection and specified 5.9 g anti-vibration rating make it suitable for demanding industrial vehicle applications when installed correctly.
Q5: What power supply does it require?
The camera supports DC 10–36 V, with maximum power consumption of 2.5 W.
Q6: What video output does it use?
It provides one-channel AHD video output at 1920 × 1080P.
Q7: Can the visible-light lens or alarm settings be customized?
Customization options include 6 mm or 2.3 mm visible-light lenses, detection zones, alarm thresholds, display modes, and alarm integration. Confirm availability with our sales team before ordering.
Q8: How is the system configured?
Configuration and calibration can be performed through a mobile web interface using the built-in Wi-Fi hotspot. Firmware updates are supported through a USB flash drive.
Q9: Is installation hardware included?
Please contact us to confirm the included cables, display, mounting accessories, and other installation requirements for your selected configuration.