MANET IP Mesh Radio Link Module for UAVs, Drones and Robots
Overview
The MANET IP Mesh Radio Link Module is a compact wireless communication solution designed for UAVs, drones, unmanned ground vehicles (UGVs), robotics, and industrial automation systems. It enables bidirectional transmission of IP video, telemetry, remote-control signals, and other data between mobile platforms and ground stations.
Using TDD-OFDM technology and adaptive modulation, the module supports flexible wireless networking for applications requiring reliable connectivity, low power consumption, and long-range communication.
Key Features
• MANET IP Mesh Networking: Supports optional self-forming mesh networking and relay functionality for flexible multi-node deployments.
• Bidirectional Wireless Transmission: Transmits IP video, telemetry, control signals, and other data in both directions.
• TDD-OFDM Technology: Designed for robust wireless communication in changing radio environments.
• Adaptive Modulation: Supports QPSK, 16QAM, and 64QAM modulation.
• Dual-Antenna MIMO Design: Supports two antenna connections for wireless communication.
• Flexible Network Modes: Supports point-to-point (P2P), point-to-multipoint (P2MP), relay, and IP Mesh modes.
• Secure Data Transmission: AES-128 wireless encryption.
• Low Power Consumption: Typical power consumption below 4.5 W.
• Compact and Lightweight: Approximately 32 g, suitable for weight-sensitive airborne and robotic systems.
• Configurable Interfaces: Ethernet and serial interfaces support integration with compatible controllers and data systems.
Technical Specifications
Frequency Range: 1420–1530 MHz
Channel Bandwidth: 3 / 5 / 10 / 20 MHz, selectable
Maximum Data Rate: Up to 30 Mbps shared uplink and downlink
RF Output Power: 25 ± 2 dBm
Receiver Sensitivity: Up to -108 dBm
Modulation: QPSK / 16QAM / 64QAM, adaptive
Networking Modes: P2P / P2MP / Relay / IP Mesh
Wireless Encryption: AES-128
Power Input: 7–30 V DC
Power Consumption: Less than 4.5 W
Dimensions: Approximately 58 × 64 × 13 mm
Weight: Approximately 32 g
Operating Temperature: -20°C to +65°C
Interfaces and Connectivity
• Ethernet: 1 × RJ45 and 1 × 4-pin ZH1.5 mm Ethernet interface
• Serial: 3 × 3.3 V TTL UART; RS232 optional
• RF: 2 × IPEX antenna connectors
• Power: XT30PW-M connector
• Additional Interfaces: 4-pin PH1.25 mm audio interface and Micro USB for firmware updates
• Auxiliary Power: Onboard 12 V output for compatible cooling accessories
Network Modes
Point-to-Point: Establish a direct wireless connection between two devices.
Point-to-Multipoint: Connect multiple remote devices to a central node.
Relay Mode: Forward data through intermediate nodes to extend network coverage.
MANET IP Mesh: Enable flexible multi-node communication and relay networking when the supported configuration includes the optional mesh function.
Applications
• UAV and drone video and data links
• Drone remote control and telemetry
• Unmanned ground vehicles (UGVs)
• Industrial robotics and automation
• Mobile inspection and monitoring systems
• Emergency response communications
• Unmanned marine platforms
• Wireless communication between mobile equipment and ground stations
FAQ
Q1: Does this module support MANET IP Mesh?
A: IP Mesh networking is available on supported versions. Please confirm the selected model and firmware configuration before ordering.
Q2: What frequency band does it use?
A: The listed operating frequency range is 1420–1530 MHz.
Q3: What is the maximum data rate?
A: The specified maximum data rate is up to 30 Mbps, shared between uplink and downlink.
Q4: Can it transmit video and control data simultaneously?
A: It is designed to support IP video, telemetry, and control data transmission. Actual performance depends on bandwidth, network configuration, and application requirements.
Q5: What is the power supply requirement?
A: The specified DC input range is 7–30 V.
Q6: Can an external power amplifier be added?
A: An optional power amplifier may be supported for extended-range applications. Confirm hardware compatibility before integration.
Q7: Is the module suitable for UAV installation?
A: Yes. Its compact dimensions, approximately 32 g weight, and low power consumption make it suitable for compatible UAV and robotic platforms.