UAV Long Range 10W Transmitter and Receiver for Wireless Video and Data Transmission
Overview
The UAV Long Range 10W Transmitter and Receiver is a professional wireless communication system designed for long-range drone operations, unmanned aerial vehicles (UAVs), and industrial remote-control applications. Combining a high-power RF amplifier with TDD OFDM wireless technology, the system enables bidirectional transmission of video, telemetry, and control data over extended distances.
With selectable transmission distance options of 22 km, 55 km, 100 km, and up to 150 km under suitable line-of-sight conditions, this wireless link provides flexible communication solutions for demanding aerial missions. Its dual-antenna architecture, configurable bandwidth, and AES128 encryption support reliable data exchange in challenging operating environments.
The system features Ethernet and serial interfaces for integration with IP cameras, flight controllers, telemetry equipment, and ground stations. Multiple frequency-band options and adjustable communication parameters allow users to tailor the system to their project requirements.
Key Features
1. Long-Range Wireless Transmission
Supports selectable communication ranges of 22 km, 55 km, 100 km, and 150 km, depending on the configuration and operating environment.
2. High-Power 10W RF Amplifier
The 10W RF output option helps extend wireless coverage for professional UAV communication applications. Lower-power configurations may also be available.
3. Bidirectional Video, Data, and Control
Supports wireless transmission of video streams, telemetry information, sensor data, and flight-control commands between airborne equipment and ground stations.
4. Dual-Antenna Architecture
ANT1 supports transmission and reception, while ANT2 is configured for reception. This arrangement helps improve reception performance and link stability.
5. Configurable Frequency Bands
Supports 806–826 MHz and 1428–1448 MHz configurations, with an optional 2.4 GHz band. Confirm the required frequency before ordering.
6. Adjustable Channel Bandwidth
Selectable bandwidths of 1.4, 3, 5, 10, and 20 MHz allow users to balance transmission distance, bandwidth utilization, and data throughput.
7. Secure Wireless Communication
AES128 encryption helps protect transmitted video and data. Frequency-hopping functionality and available configuration options depend on the specific product configuration.
8. Flexible Interface Integration
Provides Ethernet connectivity, multiple RS232 serial channels, audio I/O, and dual antenna interfaces for integration with compatible onboard and ground equipment.
9. Compact and Rugged Construction
The aluminum-alloy enclosure is designed for professional applications where compact dimensions and mechanical durability are important.
10. Network Configuration and Monitoring
Web-based management and UART configuration support adjustment of wireless parameters and monitoring of link status.
Technical Specifications
Product Type: UAV Long-Range Wireless Transmitter and Receiver
RF Output Power: 10W; 2W and 5W options may be available
Transmission Distance Options: 22 km / 55 km / 100 km / 150 km
Modulation: TDD OFDM
Frequency Bands: 806–826 MHz / 1428–1448 MHz / optional 2.4 GHz
Channel Bandwidth: 1.4 / 3 / 5 / 10 / 20 MHz
Maximum Throughput: Up to 30 Mbps at 20 MHz bandwidth
Modulation Constellation: Adaptive QPSK / 16QAM / 64QAM
Receiver Sensitivity: -108 dBm at 1 Mbps
Encryption: AES128
Antenna Configuration: ANT1 transmit/receive; ANT2 receive-only
Network Modes: Point-to-point, point-to-multipoint, relay; mesh optional
Interfaces: 2 × Ethernet, 3 × RS232, audio I/O, dual SMA antenna ports
Power Input: 24–30 V DC for the 10W configuration
Power Consumption: Less than 40 W at 10W RF output
Maximum Supported Speed: Up to 120 km/h
Dimensions: 124 × 67.8 × 28.5 mm
Weight: Approximately 252 g
Applications
• Long-range UAV and drone video transmission
• Aerial surveying, mapping, and infrastructure inspection
• Drone telemetry and flight-control communication
• Industrial inspection and remote monitoring
• Emergency response and disaster assessment
• Unmanned ground vehicles and robotic systems
• Ground stations and remote wireless communication networks
FAQ
Q1: What is the maximum transmission distance?
A: Available distance options include 22 km, 55 km, 100 km, and 150 km. Actual performance depends on line of sight, antennas, installation height, interference, and environmental conditions.
Q2: Does the system support simultaneous video and telemetry?
A: Yes. The system supports bidirectional wireless communication for compatible video, telemetry, and control data.
Q3: Which frequency bands are available?
A: The listed configurations include 806–826 MHz and 1428–1448 MHz, with an optional 2.4 GHz band. Confirm regional frequency regulations and the required configuration before ordering.
Q4: Is the system compatible with IP cameras and flight controllers?
A: Ethernet interfaces support compatible IP equipment, while serial interfaces support suitable telemetry and control devices. Verify interface protocols and pin assignments before integration.
Q5: What power supply is required for the 10W version?
A: The listed input range is 24–30 V DC. A suitable regulated power supply must accommodate the system's operating and peak current requirements.
Q6: Is a transmitter and receiver pair included?
A: Please confirm the selected package contents before ordering. A complete wireless link generally requires compatible transmitting and receiving units, antennas, and suitable power supplies.
Q7: Can the frequency or configuration be customized?
A: Frequency-band and configuration options may be available depending on the project. Contact us with your required frequency, transmission distance, interface, and application details.
Ordering Notes
Please confirm the required transmission distance, operating frequency, RF power, and package contents before placing your order. Long-range performance figures are configuration-dependent and should not be treated as guaranteed operating distances. Always operate RF equipment in compliance with local regulations.